What to do if my anko WBL-2105 jug is leaking?
If the jug of your anko Blender is leaking, ensure that the blade assembly is correctly assembled to the jug. Leaking can happen if it's misaligned when twisted onto the jug. Turn the blade assembly tightly clockwise to secure it.
Why my anko WBL-2105 doesn't turn on?
If your anko Blender unit doesn’t turn on, first, make sure it is properly plugged in. Next, check that the blade assembly is correctly assembled to the jug and is not misaligned.
What to do if anko WBL-2105 motor doesn't start?
If the motor of your anko Blender doesn’t start or the attachment doesn’t rotate, ensure that the tabs of the jug are seated in the slots and turned clockwise.
How to improve mixing with anko WBL-2105 Blender?
If your anko Blender isn't mixing ingredients well, try pulsing them for the best results. Press down on the jug in short intervals for even blending and chopping. When working with frozen ingredients, pulse in short intervals of 2-5 seconds and repeat as needed.
Why is my anko WBL-2105 chopping food unevenly?
If your anko Blender is not chopping food evenly, it might be because you are trying to chop too much food at once, or you are not pulsing properly. Try reducing the amount of food in the jug.
Why is food too watery in my anko Blender?
If your anko Blender is chopping food too finely or making it too watery, it means the food has been over processed. For the best results, use short operating intervals.
How to make snow from ice cubes in anko Blender?
To achieve the best results when making snow from ice cubes with your anko Blender, use ice straight from the freezer. Try short operating intervals instead of long ones, and ensure the jug is completely dry before adding ice.
What to do if my anko WBL-2105 Blender doesn’t turn off?
Unplug the power cord from the electrical power outlet and call Kmart customer service for support.
Protect against electrical shock; do not submerge appliance or let power cord contact water or other liquids.
Appliance not for use by persons with reduced capabilities unless supervised.
Never leave unattended, unplug before assembly/cleaning, handle cord properly, use on dry level surface.
Handle blade assembly with care, avoid moving parts, and do not attempt to sharpen blades.
Lists parts: motor base, tall jug, small jug, grinding blade assembly, blending blade assembly, travel lid, lip rings.
High-powered blender for ice crushing, blending, and grinding, ideal for extracting nutrients.
Wash parts (except motor base) in warm soapy water; clean motor base with damp cloth.
Guide for choosing tall jug for blending/mixing/pureeing and small jug for grinding.
Steps for using the blender: ingredient prep, assembly, operation, and disassembly.
Max operating time 1 min, rest 3 mins. Cool down for 6 mins if motor stops.
Solutions for motor not starting or attachment not rotating.
Addressing uneven chopping, over-processing, or poor ice snow creation.
Resolving jug leaks, unit not turning on/off, or poor mixing.
Guidance for properly aligning the blade assembly with the jug.
Steps for cleaning blender parts and motor base. Caution with sharp blades.
How to store clean and dry components upright in a safe location.
To Next Page
General
