Why my anko WH-169-6 does not work?
Your anko Dispenser might not be working because it is not plugged into mains power. Ensure the appliance is properly plugged in. Alternatively, the appliance may be locked. Unlock it by pressing the “Unlock” key.
What to do if my anko WH-169-6 doesn’t dispense water?
If your anko Dispenser isn't dispensing water, it could be due to a couple of reasons. First, check that the water tank is properly loaded and locked in place, referring to the “BEFORE FIRST USE” instructions. Secondly, the appliance might be locked; try unlocking it by pressing the “Unlock” key.
Why is the alarm symbol showing on my anko WH-169-6?
The alarm symbol on your anko Dispenser indicates a problem with the water level or temperature. It could mean there's not enough water in the tank, so add water, but don't exceed the MAX level mark. Alternatively, the water temperature in the tank might be too high or too low; use cold water at room temperature.
How to fix a slow dispensing rate on my anko Dispenser?
If your anko Dispenser has a slow dispensing rate, it might be because impurities have blocked the water inlet. Try cleaning the water inlet with a soft brush.
Why is the hot water temperature low on my anko WH-169-6?
A low hot water temperature is normal during the first use of your anko Dispenser. Dispense and discard 2 cups of water. The water dispensed after that will be at the set temperature.
Initial safety precautions regarding electrical hazards, cord placement, and surface requirements.
Further safety instructions on appliance use, placement near heat, extension cords, and tampering.
Additional safety notes on supervision, operating conditions, materials, and water handling.
Diagram and labels identifying the key parts of the hot water dispenser.
Guide to selecting desired water temperature and dispensing volume.
Instructions on how to unlock the appliance and initiate water dispensing.
Steps for unpacking, cleaning, filling the water tank, and connecting power.
Detailed steps for operating the hot water dispenser, including selecting settings and dispensing.
Information on the alarm symbol, water level, and temperature variations during operation.
Procedures for safe and effective cleaning of the appliance and its parts.
Steps for preparing and storing the appliance for future use or periods of inactivity.
Solutions for common problems encountered with the hot water dispenser.
To Next Page
General