Qty. (2) 32009 (45x75x20mm) taper roller
bearing for J1 - Sourced from Amazon or
Ali Express
Qty. (2) 30206 (30x62x17.25mm) taper
roller bearing for J2. - Sourced from
Amazon or Ali Express
Qty. (1) 30204 (20x47x15.25mm) taper
roller bear for J3. - Sourced from Amazon
or Ali Express
Qty. (1) AXK3552/AS3552 (35x52x4mm)
thrust bearing with washers. - Sourced
from Amazon or Ali Express
Qty.(3) NTA1625 (1.00x1.5625x0.0781
inch) thrust bearing (2 for J4 and 1 for J6)
–Sourced from McMaster Carr
Qty.(4) TRA1625 (1.000x1.5625x0.0312
inch) thrust washer (3 for J4 and 1 for J6)
– Sourced from McMaster Carr
Hardware Components
All Bearings, belts, chains, pulleys, sprockets, keys and screws are available
on the robot kits page or can be sourced from various suppliers.
To Next Page
Loading...