Qty. (1) 180XL037 belt for J1 - Sourced from
Amazon or Ali Express
(2’ length) 04B 6mm roller chain for J3 –
Sourced from McMaster Carr
Qty.(1) 04B link for 6mm chain for J3 –
Sourced from McMaster Carr
Qty.(1) 84XL037 belt for J4 - Sourced from
Amazon or Ali Express
Qty.(1) J5 belt - Sourced from Amazon or Ali
Express
Qty.(1) 60T XL pulley for J1 - Sourced from
Amazon or Servo City (there is also a 3D print file
for this but I have not tested the 3D printed part
in a built robot)
NOTE: the Annin Robotics hardware kit comes
with a machined aluminum version of this pulley.
To Next Page
Loading...