DM542T digital stepper
driver.
You will need (5) of these
drivers for axis 1,2,3,5 & 6
of the robot. You will need
one additional driver if you
would like to build a travel
track.
Stepper drivers as well as
stepper motors package for
the AR3 robot is available
from Stepperonline
NOTE: the drivers shown
in some of the pictures in
this manual are blue –
however the DM542T is
typically black.
250W 24V 10A 115/230V
Switching Power Supply
Power Supply as well as
stepper motors package for
the AR3 robot is available
from Stepperonline
https://www.omc-stepperonline.com/
To Next Page
Loading...