2.54mm female header
pins.
You will need (2) header
pin strips that have 24 pins
each.
This item is typically
available in 40 pin rows in
sets of 10 as shown – in
the instructions to follow we
will cut these down to 24
pins long.
This item is available from
Amazon or multiple online
electrical supply vendors.
8 channel 5vdc relay
module.
This item is available from
Amazon or multiple online
electrical supply vendors.
Note: Relay module is
included in this project for
general purpose needs.
This relay module can be
used to control your gripper
or any other number of
actuators or solenoids that
you require the robot to
control from the program
console.
To Next Page
Loading...