Anonabox The Original User Manual

6
Startup Guide
setting up your anonabox
Anonabox is easy to setup. It is design to be plug–and–play. In these four, simple
steps your device will be running and you can browse the web with Tor. Make sure
to perform the following steps in order to ensure the device connects properly.
Step 1 Plug in WAN
Insert a basic ethernet cable
into your internet modem or
router. Next, insert the op-
posite end of this ethernet
cable into the WAN port of
the Anonabox.
Step 2 Plug in power
Connect the provided micro–
usb cable into an available USB
port. Next, plug the opposite
end of the USB cable into the
USB port of the Anonabox. The
device will then follow a “boot-
ing sequence” indicated by a
ashing LED light on the side of
the Anonabox.
WAN
Micro–USB

Anonabox The Original Specifications

General

Brand	Anonabox
Model	The Original
Category	Network Router
Language	English