Anova MG246 - Page 111

13. TROUBLESHOOTING
Should the unit require additional overhaul service, consult an authorized ANOVA
service facility in your area.
TROUBLE
CAUSE
SOLUTION
1) Failure to start
-Replace the fuel in case of
finding water or another
mixture of inferior quality.
-Check for engine flooding.
-Check spark plug spark
-Replace with appropriate
fuel.
-Remove and remove the
spark plug wire.
-Then pull the starter again
without primer.
-Replace with a new one.
2) Lack of force / poor
acceleration / uneven idle
-Check the fuel for water or
some inferior quality mixture.
-Check the air filter for clogs
-Check carburetor for
improper settings.
-Replace with appropriate
fuel.
Clean
Readjust needle speed
3) The oil does not come out
-Check for inferior quality oil
-Check the oil flow for any
obstruction
Replace
Clean