SETTING UP
• Fill a pot or container with water.
• Place it on a heat-safe surface or trivet, away from counter edges.
• Loosen the rear screw on your Anova Precision® Cooker clamp.
• Fit the clamp over the edge of your pot.
• Tighten the rear screw so it is snug against the wall of the pot.
• Adjust the height of the cooker by adjusting the side screw.
(do not overtighten screws)
• Plug in your Anova Precision® Cooker.
• Place your food in a sealable bag and lower the bag into the water.
• Clip the bag to the side of the pot.
2019-06-10_PCPkg_QSG.indd 4 6/20/19 5:03 PM
To Next Page
Loading...
