Ansell AlphaTec 66-320 model 151

Need help?

Do you have a question about the Ansell AlphaTec 66-320 model 151 and is the answer not in the manual?

Summary

1. Safety considerations

3. Approvals

3.1 European EC Type approval

4. Proper use

4.1 Intended use

Specifies the suit's protection against chemicals, liquids, aerosols, solids, and infectious agents.

4.2 Limitations of use

Outlines restrictions such as avoiding open flames, heat, firefighting, and explosive environments.

5. Pre-use

5.1 Donning

Covers essential steps and considerations before using the suit.

5.1.1 Hood adjustment

Guides on adjusting the hood's elastic band for a secure fit around the face.

5.1.2 Fitting the face piece

Emphasizes correct selection and positioning of the RPE face piece on the suit/hood face seal.

5.1.3 Donning the suit

Provides step-by-step instructions for putting on the suit with an assistant.

6. In use

7. After use

7.1 Initial decontamination

Instructions for decontaminating the suit before removal to protect the wearer.

7.2 Taking off the suit

7.3 Final decontamination

Details methods for second decontamination if initial is insufficient, covering various chemical types.

8. Storage

8.1 Storage conditions

8.2 Storage methods

9. Maintenance

9.1 Maintenance schedule

Provides a schedule for visual inspection, cleaning, lubrication, and replacements.

9.2 Visual inspection of suit

Details steps for inspecting the suit's interior, exterior, material, seams, and components for defects.

9.3 Cleaning

Recommends hand washing with mild detergent and water, and air drying.

9.5 Bayonet ring

9.5.1 Function

9.5.2 Maintenance

9.6 Replacing gloves

9.7 Replacing rubber diaphragm in AlphaTec Exhaust valve

10. Disposal

10.1. Retirement consideration