How to see set humidity level on ansio Aeropura Midi?
The display shows the room’s humidity level and not the set humidity. Press the up or down arrow button once to see the set humidity on your ansio Dehumidifier.
What to do if my ansio Aeropura Midi is not working?
If your ansio Dehumidifier isn't working, it could be due to a few reasons. First, ensure the power plug is properly connected to the wall socket and switched on. Another reason may be that the water tank is full and needs to be emptied. Finally, check that the water tank is correctly positioned within the unit.
Why ansio Aeropura Midi does not dehumidify well?
If your ansio Dehumidifier isn't dehumidifying well, several factors could be the cause. The filter might be dirty and needs cleaning. The air inlets or outlets could be blocked, so clear them. The room might be too big or well-ventilated; ensure it's within the device's operating parameters and close off any cross-ventilation. Also, if the room temperature is too low, it can reduce dehumidification; raise the temperature if needed using non-steam producing heating appliances. Finally, check if the set humidity on the unit is higher than the room humidity and set it lower.
General| Brand | ansio |
|---|---|
| Model | Aeropura Midi |
| Category | Dehumidifier |
| Language | English |
To Next Page
