Anslut 406062 - Technical Data; Description; Use

EN
7
TECHNICAL DATA
Rated voltage 230 V
~
50 Hz
Max load 3500W
Interval 30 min
DESCRIPTION
1. Disc
2. Segment
3. Switch
FIG. 1
USE
1. Push down the segments for the time the connected
appliance is to be switched on. Each tab corresponds to
30 minutes.
2. Turn the disc until the arrow points to the actual time.
3. Plug the timer into the power point.
4. Connect the appliance to the timer. Make sure that
the appliance is switched ON.
5. Put the switch in position I for constant mode,
or in position for timer mode.