CARE & MAINTENANCE
To make sure the PC Energy Saving Mains Socket works
properly, please keep the contacts free from dust and con-
tamination. To clean the unit disconnect it from the mains
and use only a dry cloth.
TECHNICAL DATA
Connection: 230V AC / 50Hz
Load: max. 2500W / 10A
Adaptive standby load: max. 70W
Power consumption: 0W in standby mode (after power cut-off)
DISCLAIMER
Information in these operating instructions can be changed
without prior notice. ANSMANN cannot accept liability for
direct, indirect, accidental or other claims or consequential
damages originated by not using this device as indicated by
these operating instructions.
Deutsch | English | Français | Español | Italiano
To Next Page
Loading...
General