Need help?Do you have a question about the ANSMANN APS2250H and is the answer not in the manual?
General| Input Voltage | 100-240 V AC |
|---|---|
| Input Frequency | 50-60 Hz |
| Output Current | 2.5 A |
| Efficiency | > 80% |
| Operating Temperature | 0°C to +40°C |
| Protection | Short Circuit |
| Storage Temperature | -20°C to 60°C |
Adjusts polarity for coaxial and jack plugs, specifying positive inside/outside and tip/barrel.
Details the voltage adjustment mechanism using a rotary switch and a key for operation.
Verify device current draw does not exceed power supply capacity to prevent overload.
Select the proper connector for your device, applying gentle pressure for insertion.
Match the device polarity using the included inverter [1] on the output cable.
Configure the output voltage using the rotary switch [3] with key [2] for the connected device.
To Next Page