ANSMANN Powerbank 20.8 User Manual

SPECIFICATIONS
1. Cell type: Li-Po battery pack
2. Capacity: 20000mAh / 74Wh
3. Input: Micro-USB - 5V DC / max. 2000mA
4. Output: USB - 5V DC
Output 1: 2100mA
Output 2: 2500mA
Output 1 & 2: max. 2500mA
5. Accessories: Charging cable (USB to Micro-USB)
6. Working temperature: -20°C to +50°C (discharge)
0°C to +45°C (charge)
7. Charging time: approx. 9 hours (depending on charge
current)
8. Protective functions: Overcharge protection, Overcurrent pro-
tection, deep, discharge protection, short
circuit protection
9. Indication: LED indication
ENVIRONMENT
Do not dispose of the unit in the normal household waste. Please
return it to your dealer, nearest recycling center or collection point.
Please also recycle all packing materials.
DISCLAIMER
Information in these operating instructions can be changed without
prior notice. ANSMANN cannot accept liability for direct, indirect,
accidental or other claims by not using this device as indicated by
these operating instructions. Consequential losses are not accepted
at any time.
WARRANTY NOTICE
We hereby offer a 3 year warranty on this POWERBANK. This does not
apply to damages caused by non-compliance of the operating inst-
ruction or physical damage due to lack of care.
Technical details subject to change without prior notice. No liability
accepted for typographical errors or omissions.
10/2016

ANSMANN Powerbank 20.8 Specifications

General

Brand	ANSMANN
Model	Powerbank 20.8
Category	Accessories
Language	English