CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPO-
SE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
USE
> CAPACITY INDICATION
Press the power button to check the energy remaining.
4 LEDs illuminate: 75% - 100%
3 LEDs illuminate: 50% - 75%
2 LEDs illuminate: 25% - 50%
1 LED illuminates: 1% - 25%
No LED illuminates: The POWERBANK is completely
discharged.
Please charge the POWERBANK immediately. If the POWERBANK will not
be used for an extended period of time, it is necessary to charge it be-
fore storage in order to avoid the rechargeable battery being damaged.
> CHARGING THE POWERBANK
MICRO USB
Insert the Micro-USB plug of the USB cable into the Micro-USB socket on
the POWERBANK and the USB plug into the USB port on a computer or a
USB charger.
TYPE C
Insert the type-C plug of the USB cable into the type-C socket on the
POWERBANK and the USB plug into the USB port on a computer or a USB
charger.
The charging process starts automatically. During the charging process,
up to 4 white LEDs indicate the charge progress. After the charging
process is complete, all 4 white LEDs illuminate steadily.
> CHARGING DEVICES
In order to charge a device, such as a smartphone for example, please
use the USB cable supplied (provided that the Micro-USB plug fits
your mobile device) or the original charge cable for your device. The
Powerbank likewise has a type-C output. Please use a suitable type-C
cable for this. Insert the USB / type C plug of the cable into the POWER-
BANK and the other end into your device. The charging process starts
automatically.
The POWERBANK has Quick Charge 3.0 and a Power Delivery (PD)
protocol. To use this technology, please check whether your device is
Deutsch | English | Français | Español | Português
Italiano | Nederlands | Dansk | Suomalainen | Norsk | Svenska
To Next Page
Loading...
Need help?
General
