Quick-Charge-capable or supports Power Delivery (PD). Please refer to
this information from the product information or operating instructions
of the respective manufacturer or the Internet.
Simultaneous charging of multiple end-devices is possible with restric-
tions. This depends on the total charge current required.
The POWERBANK switches off automatically after the charging is
complete. Please disconnect your device from the POWERBANK once the
charging process is complete. Please note that the Powerbank should
not be charged and discharged simultaneously.
The POWERBANK has a smart microcontroller that detects the connec-
ted device, provides the optimum current, and thus reduces the
charging time to a minimum.
The POWERBANK may heat up a little depending on the charge/dischar-
ge current.
TECHNICAL DATA
1. Cell type: Li-Po rechargeable battery pack
2. Capacity: 24.000mAh / 88.8Wh
3. Input: Micro-USB: 5VDC | 2000mA
Type C (PD): 5VDC | 2000mA
9VDC | 2000mA
4. Output: USB: 5VDC | 3000mA
USB (QC3.0) / USB Type C (PD):
5VDC | 3000mA
9VDC | 2000mA
12VDC | 1500mA
Total output: 18W
When any three or two outputs are loaded at
the same time, the output will jump to 5VDC.
5. Accessories: 2x charging cables (USB to Micro-USB and
USB Type C to USB Type C)
6. Operating temperature: -10°C to +25°C
7. Charge time: 5V | 2000mA: about 12h
9V | 2000mA: about 7h
8. Protective functions: Over-charging protection, deep discharge
protection, overload protection
short-circuit protection
9. Display: LED display
Deutsch | English | Français | Español | Português
Italiano | Nederlands | Dansk | Suomalainen | Norsk | Svenska
To Next Page
Loading...
Need help?
General
