FUNCTIONAL OVERVIEW
> Desktop charger for 1-8 AAA or AA NiMH/NiCd cells
> Including 1 USB charging output (5V / 1000mA)
> The battery’s charging condition is not important prior to charging
> Charging starts automatically when a battery is inserted
> Discharging of the batteries before charging is possible
> Microprocessor controlled charging and monitoring of the charging status
> Battery full detection (-dV)
> Automatic changeover to trickle charge
> Multiple over-charging protection per cell
> Individual supervision of each cell
> Reverse polarity protection
> Faulty cell detection / accidental alkaline insertion detection
> Multi-coloured LED indicators show the battery status for each charging slot
> For worldwide use (100-240V AC / 50-60Hz)
OPERATION
Please insert the mains input plug (included) so that it connects to the two power con-
tacts located on the power supply and push the plug until it clicks in to place (see illustra-
tion [1]). Please ensure that you hear the input plug click into the power supply to ensure
that the unit is safe to use. Connect the power supply to the charger with the output plug.
Finally, connect the power supply to the mains (100-240V AC 50-60Hz).
The charger is now ready for use. You can insert 1-8 AA/AAA (or combination of both si-
zes) NiMH or NiCd rechargeable batteries. You can also connect a USB cable using the USB
port to charge other devices such as a mobile phone, smart phone or MP3 player. Insert all
batteries with correct polarity corresponding to the symbols in the charging slot. The char-
ging process starts automatically. If desired, press the “DISCHARGE” button to discharge
all inserted batteries before charging. Once a battery is discharged it will automatically
be recharged. If you select the discharge function, all batteries which you insert while a
discharging or charging process is running will be discharged before charging. If this is not
required, press the “DISCHARGE” button again and all inserted batteries will be charged.
It is normal that batteries may become warm during charging. Once a battery is fully
charged, the charger automatically switches to trickle charge. The trickle charge prevents
self discharge of the batteries when left in the charger.
To Next Page
Loading...
Need help?
General
