Need help?Do you have a question about the Ansul AUTOMAN II-C and is the answer not in the manual?
General| Category | Industrial Equipment |
|---|---|
| Type | Fire Suppression System |
| Model | AUTOMAN II-C |
| Manufacturer | Ansul |
| Actuation | Automatic and manual |
| Application | Commercial kitchens, industrial cooking equipment |
| Agent | Wet chemical |
| Capacity | Varies by system configuration |
| Standards | Complies with NFPA 96 and UL 300 |
Describes the manual's purpose and intended use for the ANSUL AUTOMAN II-C.
Details the ANSUL AUTOMAN II-C components, enclosure, and mounting features.
Highlights temperature restrictions and cartridge type considerations for safe operation.
Explains how the release mechanism is actuated electrically or manually.
Guides on selecting a suitable location and securing the ANSUL AUTOMAN II-C enclosure.
Provides specific warnings and important considerations during the installation process.
Details selecting location, mounting junction box, and routing conduit for the pull station.
Explains how to route the wire rope through pulleys and connect it to the release mechanism.
Describes connecting the release to the control unit using terminal strips and wire gauges.
Lists input voltage, current, contact ratings, and coil resistance for the device.
Details the sequence of events when the solenoid is activated and switches change position.
Refers to manufacturer's manual for testing the detection/alarm control unit.
Describes jointly testing wiring with control system reps before arming.
Details procedures for testing the full system actuation, including agent tank assembly.
Outlines steps to check the solenoid for damage or malfunction.
Details the steps to properly arm the ANSUL AUTOMAN II-C release.
Guidance on selecting the correct cartridge and pressure relief device.
Specifies monthly inspection criteria for readiness and operability.
Describes the sequence of actions for performing regular maintenance on the release.
Steps to place the system back into service after maintenance is completed.
To Next Page