Ansul AUTOPULSE IQ-396X - Operating Time Functions; Time Functions and Real-Time Clock Usage; Operating Coding Functions for NACs

16 AUTOPULSE IQ-396X Programming Doc. 50402:B 07/22/96
Changing a Custom Label
Zone Change Screen
The Zone option lets you change the custom label assigned to zones
1-99. From the Program Change screen, select <5> to display the
Zone Change screen.
Changing a Custom Label
How to change a Custom Label
CHANGE ZONE LABEL SELECT ZONE 01-99:
ENTER UP TO 19 CHAR
Custom Label (22-40)
Blinking cursor
5
0=CLR 1=AUTO 2=POINT 3=PASSWD 4=MESSAGE
5=ZONES 6=SPL FUNCT 7=SYSTEM 8=CHECK PRG
Rules for Changing a Custom
Label
oTsihtoD
lebalenozaegnahC.dapyekehtmorflebalenozwenaepyT
nilebalenozehtevaS
yromemsserP
C
nilebalenozehtserotsmargorpehT
egnahCenoZehtsyalpsiddnayromem
.knalbsdleifllahtiwneercs
egnahCenoZehtevaeL
agnignahctuohtiwneercs
lebalenoz
sserP
S
edoMmargorPehtotsnruteryalpsidehT
 The zone number displays in the first line, characters 39 and 40.
 For single digit numbers, enter a leading zero before the digit.
 Enter an alphanumeric zone label into line 2, characters 2240.
 The program forces a blank for the first character which inserts a
space between the device and zone labels for a printout.
To change a custom label for a zone or a device, follow these
instructions: