Ansul AUTOPULSE IQ-396X - Introduction to AUTOPULSE IQ-396 X; System Overview and Capabilities; Key Operating Features; Control Panel Components Identification

AUTOPULSE IQ-396X Programming Doc. 50402:B 07/22/96 7
Using Programming Keys
GG
GG
G
The IQ-396X provides two methods for field-programming the control
panel: using the Autoprogram feature or the VeriFire
TM
400 Programming
Utility. The following table lists the benefits of each method:
gnimmargorpsihT
...dohtem
...rofelbatiustsomsi
margorpotuAfoecneinevnocdnadeepS
;ylkciuqenilnolenaplortnocehtgnittup
dna
.noitamrofnignimmargorpgnignahc
004eriFireVgnitidednagnitaercfosnaemtneiciffE
.yrtneatadfotolaeriuqertahtsmargorp
Choosing a Programming
Method
The following table contains definitions for the keys that you use to pro-
gram the control panel.
yeksihtsserPoT
C
.noitamrofnitpeccA
S
gnivastuohtiwnoitarepotsalstrobA
.edommargorPtixeotesuoslA.noitamrofni
L
.dleiftxenehtotrosrucehtevoM
M
.dleifsuoiverpehtotrosrucehtevoM
G
.sdleifatadgnomarosrucehtevoM
Common Programming Keys
Programming Methods
The VeriFire 400 Off Line Programming Utility lets you load or down-
load programs between a personal computer and the control panel. To
use the VeriFire 400, follow these steps:
Transferring programs
between a PC and the
control panel
VeriFire 400
Programming
Utility
TB2
Cable 75267
PC-to-Control Panel Transfer Connections
For detailed installation
information, refer to the
following:
 the VeriFire 400 Product
Installation Document.
(Document 50376); and
 the VeriFire 400 online
help file.
petSnoitcA
1ehtnotrop232-AIEehtotretupmocelbitapmoc-CPatcennoC
:lenaplortnoc
tropMOCCPehtot)76257N/P(elbacdeilppusehttcennoC)a
.)4MOC1MOC(
)lanimreT/CP(2BTlanimretotelbacehtfodnerehtoehttcennoC)b
ehtno
:swollofsa)noitcennocfoepytehtnognidneped(lenaplortnoc
2.CPehtotnierawtfos004eriFireVehtdaoL
3.ytilitUgnimmargorPeniLffO004eriFireVehtnuR
2BT
)lanimreT/CP(
eriWtceriD
snoitcennoC
medoM
snoitcennoC
XTkcalBneerG
XRneerGkcalB
FERdeRdeR