ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-2001262 ©2001 Ansul Incorporated Litho in U.S.A.
System Components
UL EX-4510 12-1-01 Page 1-14
Description
The pressure bleeder plug must be used to relieve the
pressure in closed actuation lines. The plug relieves the
pressure through a small orifice. This slow relief of pressure
does not affect the function of the actuation line.
ANSUL and INERGEN are trademarks of Ansul Incorporated or its affiliates.
Pressure Bleeder Plug – 1/4 in.
Component Material Thread Size/Type Approvals
Bleeder Plug Brass 1/4 in. NPT Male UL Listed (EX-4510)
Shipping Assembly
Part No. Description
842175 Pressure Bleeder Plug
ORIFICE
1/4 IN. NPT
ANSUL
®
To Next Page
Loading...