System Components
UL EX-4510 12-1-01 Page 1-23
Description
The INERGEN
®
system nozzle deflector shield is used to
control the pattern of the discharge of the INERGEN agent.
The deflector shield helps keep the agent discharge away
from false ceiling tiles and fragile light fixtures, avoiding
damage to them.
The deflector shields are constructed of steel and painted
with a cameo cream colored paint. They are available in
five sizes.
Nozzle Deflector Shield
Component Material Approvals
Nozzle Steel UL Listed (EX-4510)
Deflector
Shield
Shipping A B C D E
Assembly Inlet Length of Overall Deflector Coupling
Part No. NPT Coupling Length O.D. O.D.
417708 1/2 in. 1 7/8 in. 3 in. 3 3/8 in. 1 1/8 in.
(4.8 cm) (7.6 cm) (8.6 cm) (2.9 cm)
417711 3/4 in. 2 in. 3 1/4 in. 3 3/8 in. 1 3/8 in.
(5.1 cm) (8.3 cm) (8.6 cm) (3.5 cm)
417714 1 in. 2 3/8 in. 3 13/16 in. 4 7/8 in. 1 3/4 in.
(6.0 cm) (9.7 cm) (12.4 cm) (4.4 cm)
417717 1 1/4 in. 2 5/8 in. 4 3/16 in. 4 7/8 in. 2 1/4 in.
(6.7 cm) (10.6 cm) (12.4 cm) (5.7 cm)
417720 1 1/2 in. 3 1/8 in. 4 29/32 in. 5 21/32 in. 2 1/2 in.
(7.9 cm) (12.5 cm) (14.4 cm) (6.4 cm)
D
B
A
C
E
ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-2001274 ©2001 Ansul Incorporated Litho in U.S.A.
003651
NOTE: There are no deflector shields available for the 2, 2 1/2, or 3 in. models.
ANSUL and INERGEN are trademarks of Ansul Incorporated or its affiliates.
ANSUL
®
To Next Page
Loading...