Ansul INERGEN - Cylinder Bracketing

System Components
UL EX-4510 7-15-02 Page 1-24
REV. 1
Description
The cylinder bracketing is designed to rigidly support the
installed INERGEN
® agent cylinders.The bracketing compo-
nents are constructed of heavy structural steel. Bracket
assemblies are available in modules for two to six cylinders
and can also be connected together for any combination
over six. Bracketing can be assembled to support single row,
double row or back-to-back rows of cylinders. Bracketing
components are painted with a red enamel coating. Uprights
and back frame assemblies can be bolted or welded
together, whichever makes the installation more
convenient.
Cylinder Bracketing
Component Material Approvals
Bracketing Steel UL Listed
(EX-4510)
Shipping Assembly
Part No. Description
845122 575 ft.
3
(16.3 m
3
) cylinder strap (single cylinder)
845245 575 ft.
3
(16.3 m
3
) cylinder channel with nuts and bolts (single cylinder)
879638 Back frame assembly (2 cylinder)
879639 Back frame assembly (3 cylinder)
879640 Back frame assembly (4 cylinder)
879641 Back frame assembly (5 cylinder)
879642 Back frame assembly (6 cylinder)
873257 Upright, for 575 ft.
3
(16.3 m
3
) cylinders (used either for right side, left side or center
(center upright required when connecting seven or more cylinders in a row))
873553 Single row or back-to-back row bracket foot (left side)
873554 Single row or back-to-back row bracket foot (right side)
873555 Double row bracket foot (left side)
873556 Double row bracket foot (right side)
418508 Center upright foot
879413 Connector (required to hook together back frames for seven or more cylinders)
418502 13 in. (33.0 cm) carriage bolt with nut (for single row 575 ft.
3
(16.3 m
3
) cylinders)
418503 27 in. (68.6 cm) carriage bolt with nut (for double row 575 ft.
3
(16.3 m
3
) cylinders)
873091 Cylinder clamp (2 cylinders)
873092 Cylinder clamp (3 cylinders)
871683 Weigh rail support – single row
871682 Weigh rail support – double row
871684 Weigh rail support – back-to-back rows
423027 Weigh rail support back-to-back double row
ANSUL
®
®