Ansul INERGEN User Manual

System Components
UL EX-4510 12-1-01 Page 1-2
Description
The AUTOPULSE
®
Control System provides a range of
features and benefits, ranging from simple detection
through counting circuits.
Several models of the AUTOPULSE
®
Control System are
available depending on the type of hazard being protected.
Refer to the Ansul Detection and Control Application
Manual for detailed information concerning all
AUTOPULSE Control Systems.
AUTOPULSE
®
Control System
ANSUL, AUTOPULSE and INERGEN are trademarks of Ansul Incorporated or its affiliates.
002195
ANSUL INCORPORATED, ONE STANTON STREET, MARINETTE, WI 54143-2542 715-735-7411 Form No. F-2001250 ©2001 Ansul Incorporated Litho in U.S.A.
ANSUL
®
®

Ansul INERGEN Specifications

General

Agent	INERGEN
Components	Nitrogen, Argon, Carbon Dioxide
Agent Composition	52% Nitrogen, 40% Argon, 8% Carbon Dioxide
Storage	High-pressure cylinders
Cylinder Material	Steel
Application	Total flooding fire suppression
Design Concentration	34.2% - 50% (depending on fuel type)
Storage Pressure	3000 psi (207 bar)
Environmental Impact	Zero ozone depletion potential, no global warming potential
Safety	Safe for use in occupied spaces when design concentration is maintained
Extinguishing Mechanism	Oxygen reduction to below combustion level
Approvals	UL, FM
Cylinder Sizes	Various sizes
Discharge Time	Typically less than 60 seconds
Typical Applications	Data centers, telecommunications, museums, archives