ANT B-TWIG 8 - User Manual

Questions and Answers

M
Mark PettyAug 3, 2025
What to do if my ANT speakers have no sound?
- J
  Jessica FreemanAug 3, 2025
  If your ANT speakers have no sound or a very low sound level, first ensure the device is properly connected to the mains outlet if the power LED is off. If the power LED is on but the channel levels are low, check the connections between the sources and the inputs, and then raise the desired channel levels. If the LEVEL is raised but there's still no signal, verify the input selectors. Finally, if Channel 3 LEVEL is raised but there's no Bluetooth signal, try syncing the Bluetooth signal again.
K
knightrobinAug 9, 2025
What to do if my ANT speakers are distorting?
- M
  Michael SellersAug 9, 2025
  If you are experiencing distortion with your ANT speakers, and the ON/LIMIT LED is lit red, lower the channel levels. If the ON/LIMIT LED is lit green, check the source level. Also, ensure a proper connection between the subwoofer and A/B elements.
M
Michael ShawAug 15, 2025
Why do my ANT B-TWIG 8 Speakers sound booming?
- M
  Melanie MurphyAug 15, 2025
  If your ANT speakers have a booming sound, check the EQ LOW level. Also, try distancing the system from the walls and check the connection between the subwoofer and A/B elements.
M
Manuel HillAug 21, 2025
How to fix harsh sound on ANT speakers?
- L
  larry23Aug 21, 2025
  If your ANT speakers have a harsh sound, check the EQ HIGH level.
A
Angela WallaceAug 27, 2025
What to do if lower frequencies have small attenuation on ANT B-TWIG 8?
- J
  Jessica RobertsAug 27, 2025
  If your ANT speakers have a small attenuation of lower frequencies, check the EQ LOW level.