To Next PageTo Next Page
Need help?Do you have a question about the Antal LD700/24 and is the answer not in the manual?
Thermal switches for circuit protection against exceptional overload.
Contains solenoids for activating the motor in button control operation.
Two switches are needed to activate the movement in both directions.
Electrical system installation and connection diagram for specialized personnel.
Suggested values for cable sections, to be increased for long systems.
Recommended section for button control cables.
Specifications for different models including power, voltage, and components.
Steps for disassembling the main sheave, stripper, and motor unit.
Instructions for mounting the base unit and motor unit to the deck.
Procedure for inserting the line into the sheave and stripper.
Recommendations for greasing parts to prevent corrosion.
Detailed diagram and parts list for the LD700 model.
Detailed diagram and parts list for the LD1000 model.
Detailed diagram and parts list for the LD1500 model.
Force, absorption, and speed charts for LD700 models.
Force, absorption, and speed charts for LD1000 models.
Force, absorption, and speed charts for LD1500 models.
General| Input Voltage | 24VDC |
|---|---|
| Output Voltage | 0-24V DC |
| Humidity | 5% to 95% non-condensing |
| Protection Features | Short Circuit |
| Control Interface | Analog |
| Storage Temperature | -20°C to 70°C |
