Need help?Do you have a question about the Antelope 10M and is the answer not in the manual?
Thanks the user for purchasing the 10M Rubidium Atomic Clock and advises reading instructions.
Describes the ISOCHRONE 10M as a lab-grade atomic master clock for ultra-high clocking precision.
Controls device power and indicates AC/DC supply status via indicators.
Shows warm-up messages and operational status including LEDs.
Details the IES AC connection for 100-240V and Speakon NL4FX for 12V DC power.
Describes 8 BNC outlets for 10 MHz atomic clock signal with length recommendations.
Provides example connection schematics for the ISOCHRONE 10M.
Provides guidelines for device placement, ventilation, and DC power connection polarity.
Details powering on the device and verifying clock signal reception on connected devices.
Thanks the user for purchasing the 10M Rubidium Atomic Clock and advises reading instructions.
Describes the ISOCHRONE 10M as a lab-grade atomic master clock for ultra-high clocking precision.
Controls device power and indicates AC/DC supply status via indicators.
Shows warm-up messages and operational status including LEDs.
Details the IES AC connection for 100-240V and Speakon NL4FX for 12V DC power.
Describes 8 BNC outlets for 10 MHz atomic clock signal with length recommendations.
Provides example connection schematics for the ISOCHRONE 10M.
Provides guidelines for device placement, ventilation, and DC power connection polarity.
Details powering on the device and verifying clock signal reception on connected devices.
General| Output | 10 MHz, Word Clock, AES/EBU, S/PDIF |
|---|---|
| Frequency Stability | < ±1 x 10-11 |
| Output Frequency | 10 MHz |
| AES/EBU Outputs | 2x XLR |
| S/PDIF Outputs | 2x RCA |
| Sample Rates | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz |
| Jitter | <1 ps |
| Output Signal | Square Wave |
| Operating Temperature | 0°C to 50°C |
| Power Supply | 100-240 VAC, 50/60 Hz |
To Next Page