AntennaCraft Mini State 5MS9000 User Manual

HDTV Ready
Amplified UHF/VHF
Indoor/Outdoor TV Antenna
with Internal Rotator
Model 5MS9000
AC/DC Remote Controlled for
RV, Boat or Home
Your Antennacraft Mini-State Directional, Rotating Antenna
provides excellent reception of VHF/UHF TV channels in most
viewing locations. The UV protective housing is made of im-
pact-resistant filled co-polymer, making the exterior resistant
to weathering. It features both AC and DC operation and is
excellent for use on recreational vehicles, boats, or in the
home.
The VHF section is a circular shaped, slot tuned, broadband,
unidirectional traveling wave antenna. The UHF section is a
broadband, multi-element array. Both UHF and VHF signals
are amplified with a built-in split-band amplifier that provides
up to 20 dB gain.
The Mini-State Antenna system is designed for long life and
requires no routine maintenance. Should the unit ever quit
working, refer to the troubleshooting tips to help determine
possible causes. Do not attempt to service this product your-
self, as opening or removing covers may expose you to dan-
gerous voltage or other hazards. Refer all servicing to quali-
fied service personnel.
WARNING: INSTALLATION OF
THIS PRODUCT NEAR POWERLINES
IS DANGEROUS. FOR YOUR SAFETY,
FOLLOW THE INSTALLATION
DIRECTIONS
CAUTION
WARNING:
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION:
Use of controls or adjustments or performance of procedures
other than those specified may result in hazardous radiation
exposure.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICING. REFER ALL SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of unin-sulated
“dangerous voltage” within the product’s enclosure that may be
of significant magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and main-
tenance (servicing) instructions in the literature accompanying
the appliance.
BEFORE INSTALLATION
Note: to CATV SYSTEM INSTALLER
Article 820-40 of the NEC specified that the cable ground shall
be connected to the grounding system of the building “as close
to the point of cable entry as practical”.
Note: Do not plug your Mini-State power supply into an AC out-
let or DC power source until all electrical and antenna connec-
tions have been made. Doing so may short out the power sup-
ply/transformer and void your warranty.
Included in the Mini-State Antenna System:
• VHF/UHF antenna with amplifier and internal rotator
• Remote hand control unit with 8’ cable
• 12 VDC/120 VAC power supply unit
• 12VDC Adapter with fused powercord
• 60’ combination coaxial/3-wire rotator cable
• Stainless steel mounting hardware kit
MINI STATEMINI STATEMINI STATE
MINI STATEMINI STATE

AntennaCraft Mini State 5MS9000 Specifications

General

Brand	AntennaCraft
Model	Mini State 5MS9000
Category	Antenna
Language	English

Summary

Amplified UHF/VHF Antenna Overview

Installation Warning: Power Lines

Critical safety warning about installing the product near power lines.

Before Installation Guidance

Notes for installers regarding cable grounding and connection sequence.

Electrical Safety Precautions

Cautions regarding electric shock, opening the unit, and servicing.

Important Safety Instructions

Water and Moisture Hazard

Warning against using the appliance near water sources.

Ventilation Requirements

Guidance on proper placement to ensure adequate ventilation.

Power Line Proximity Warning

Extreme caution advised when installing near overhead power lines.

Lightning Protection Measures

Instructions to unplug the unit during storms for surge protection.

Object and Liquid Entry Warning

Prohibition of inserting objects or liquids into the unit's openings.

Mounting and Service Guidelines

Mounting Recommendations

The appliance must be mounted strictly as recommended by the manufacturer.

Conditions Requiring Service

List of specific damage or malfunction scenarios requiring professional service.

Outdoor Antenna Grounding

Grounding requirements for outdoor antennas per National Electrical Code.

Antenna Specifications and Setup

Antenna Specifications

Technical details including bandpass, gain, impedance, and power requirements.

Connecting Cables to Antenna

Step-by-step guide for connecting coaxial and rotator cables to the antenna.

Attaching the Mounting Bracket

Instructions for securely attaching the mounting bracket to the antenna.

Outdoor Mounting Advice

Recommendations for optimal outdoor antenna placement away from obstructions.

RV and Boat Mounting

Guidance for mounting the antenna on recreational vehicles and boats.

Power, Operation, and Support

Connecting to Power Sources

Instructions for connecting to AC and DC power, including safety notes.

Antenna Operation

How to use the remote control to rotate the antenna for best reception.

Troubleshooting Common Issues

Lists common symptoms, probable causes, and solutions for antenna problems.

Limited Warranty Information

Details on the 90-day warranty, coverage, and claim procedures.

Out-of-Warranty Service

Procedure for obtaining repair or replacement for units outside the warranty period.