To Next PageTo Next Page
Need help?Do you have a question about the AntennaTek Signal Commander LPDA 200 and is the answer not in the manual?
General| Impedance | 50 Ohms |
|---|---|
| Connector Type | N-Type Female |
| Frequency Range | 200 MHz - 2 GHz |
| Polarization | Linear |
| VSWR | < 2.0:1 |
| Operating Temperature | -40°C to +70°C |
Planning the installation of the antenna, considering vehicle pre-wiring and location.
Detailed steps for mounting the antenna, drilling holes, and connecting cables for installation.
Instructions for lubricating gears and O-rings on the elevating shaft assembly for maintenance.
Guide on how to raise and rotate the antenna, including switching on power and TV.
Instructions for safely lowering the antenna, aligning pointers, and checking for roof contact.
Specifies the warranty period for the Signal Commander Antenna, which is one year.
Identifies AntennaTek, Inc. as the provider and original purchaser as the recipient of the warranty.
Details what repairs or replacements are covered by the warranty and freight charges.
Lists exclusions from warranty coverage, such as accidents, misuse, and consequential damages.
Outlines the purchaser's duties, including proof of purchase and proper maintenance.
