To Next PageTo Next Page
Need help?Do you have a question about the ANTEO MICROPLUS MP 075 H and is the answer not in the manual?
Tail-lifts are for loading/unloading goods on industrial/commercial vehicles with operator and carriages.
Forbids exceeding load limits, unauthorized operations, and use without adequate lighting.
Improper use is forbidden due to potential damage and invalidates warranty.
Strictly forbids tampering with components, as it excludes ANTEO's liability and invalidates warranty.
Emphasizes careful control, clear area, proper footwear, and avoiding objects on controls.
Warns about platform stability, inclination limits, load restrictions, and proper use of stabilizers.
Details controls in the cab and on the main console, including their functions and indicators.
Details steps for starting the unit: switch ON, unlock platform, insert key, check lights.
Explains the motor's overheating protection and the reset procedure after cooling.
Warns about ground conditions and strictly prohibits using stabilizers as jacks.
Ensure no people/objects in radius and maintain clear vision of vehicle rear during opening.
Explains how to lower and lift the platform, ensuring ground contact and alignment.
Emphasizes careful maneuvering, load limits, and keeping away from edges.
Details the motor's overheating protection and the reset procedure after cooling.
Warns against exceeding 3° inclination and prohibits rotation with loaded platform not on ground.
Emphasizes careful maneuvering, load limits, and keeping away from edges when using auxiliary controls.
Emphasizes careful maneuvering, stability, footwear, and keeping away from edges.
Prohibits rotation with a lifted platform; using two controls prevents accidental movement.
States that the roll-stop device is mandatory when moving loads on non-blockable wheels.
Emphasizes following the procedure and specific steps for appended platforms.
Warns NEVER to leave the key inserted when the tail-lift is not used and to remove it if platform is left in dangerous position.
Explains pilot light (C2) behavior, immediate stop if on during movement, and contact Anteo if persistent.
Before replacing, find short circuit cause; never repair fuses or use jumper wires.
General| Brand | ANTEO |
|---|---|
| Model | MICROPLUS MP 075 H |
| Category | Industrial Equipment |
| Language | English |
