EasyManua.ls Logo

ANthony AJ Series User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ANTHONY
60 CYCLE
“AJ” SERIES CENTRIFUGAL PUMP
OWNER’S MANUAL
INSTALLATION
OPERATION
PARTS
3/4 HP MODEL
AJ104-2L
This manual should be furnished to
the end user of this pump; its use will
reduce service calls and chance of injury
and will lengthen pump life.
S269 (Rev. 12/2/00)
907 0594
Question and Answer IconNeed help?

Do you have a question about the ANthony AJ Series and is the answer not in the manual?

ANthony AJ Series Specifications

General IconGeneral
BrandANthony
ModelAJ Series
CategoryWater Pump
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Provides essential safety guidelines and reminders for operating the equipment.

Specific Warnings and Cautions

Details specific hazards like incorrect installation, pressure risks, and hot motor warnings.

INSTALLATION

Pump Mount Requirements

Specifies conditions for securely and safely mounting the pump to prevent vibration.

ELECTRICAL

Grounding and Bonding

Explains how to properly ground and bond the motor according to electrical codes.

Wiring

Circuit Breaker and GFCI Installation

Guides on installing circuit breakers and GFCI for safety and protection against electrical hazards.

PUMP SERVICE

TROUBLESHOOTING GUIDE

Failure to Pump: Reduced Capacity or Discharge Pressure

Addresses issues like suction leaks, lost prime, clogged impeller, and worn impeller.