Set the Content Directory to ‘/storage/music’, as shown above, and select ‘Update’.
How to Run MinimServer
After MinimServer has been installed on the Antipodes server it will start automatically and run continuously. There are no ‘Start’ or ‘Stop’
commands for MinimServer.
How to Use MinimServer
With DLNA solutions, you control the renderer device and it pulls music from DLNA servers. So running MinimServer on your Antipodes makes
your Antipodes server appear as a UPnP/DLNA server on UPnP/DLNA renderer devices on your network. These could be networked music
players, computers, televisions, tablets, smartphones etc.
You can also use UPnP/DLNA apps on a tablet or smartphone as a remote control device to manage such playback solutions, selecting the
DLNA servers to play from and the DLNA renderers to play to.
There are also two UPnP/DLNA renderer applications on Antipodes music servers; MPD and the UPnP/DLNA Interface plugin that is included
in the Squeezebox Server, which is pre-enabled:
To Next Page
Loading...
