Need help?Do you have a question about the Anton/Bauer Interactive 2000 PowerCharger and is the answer not in the manual?
General| Brand | Anton/Bauer |
|---|---|
| Model | Interactive 2000 PowerCharger |
| Category | Battery Charger |
| Language | English |
Lists key features of the InterActive 2000 PowerCharger, including charging systems and LCD display.
Optional module for automatic calibration and diagnostic testing of DIGITAL and Logic Series batteries.
Expands charging capability to eight Logic Series Gold Mount batteries.
Allows upgrading 40 watt models (2400 series) to 70 watt (2700 series) capability.
Important warning about the apparatus requiring proper earthing for safe operation.
Specifies that fuses are PCB mounted and should only be replaced by qualified technicians.
Describes the automatic self-test mode initiated upon applying mains power.
Explains that charging is fully automatic; mount battery and the charger executes the routine.
Lists compatible Anton/Bauer Logic Series Gold Mount batteries and the InterActive communication feature.
Details the three stages of charging: Primary, Balancing/Equalize, and Lifesaver maintenance.
Explains the various indicators displayed on the liquid crystal display (LCD).
Identifies the meaning of the red and green LED pairs on each charge position.
Allows the operator to select a specific battery for immediate charging priority.
Upgrades the PowerCharger to a battery management system for testing and anomaly identification.
Step-by-step instructions for using the DDM to perform battery tests.
An automatic mode for DIGITAL batteries that performs a full charge-discharge-charge cycle.
To Next Page
