Anton Oliver BCW-48 - User Manual

Anton Oliver BCW-48

8 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

SUOMI

SVENSKA

ENGLISH

BCW-48

BCW-25 BCW-35

Table of Contents

Questions and Answers

D
Dr. Troy ColemanAug 4, 2025
Why is my Anton Oliver BCW-48 Wine Cooler not reaching the set temperature?
- J
  Jennifer JonesAug 4, 2025
  If your Anton Oliver Wine Cooler isn't reaching the set temperature, it could be due to several reasons: * The cooler might be too close to a heat source. Ensure it's away from direct sunshine or other heat sources. * There might be insufficient ventilation. Place the cooler in a well-ventilated area and keep items away from the fans. * The door may be opened too frequently or for too long. Make sure to close the door tightly and avoid opening it unnecessarily.
B
barbaraolsenAug 13, 2025
What to do if my Anton Oliver BCW-48 Wine Cooler does not start?
- L
  Logan GriffinAug 14, 2025
  If your Anton Oliver Wine Cooler does not start, there could be a couple of reasons: 1. There might be a power failure. Make sure the cooler is properly plugged in and the power socket is switched on. 2. A house fuse may have blown. In this case, replace the broken fuse in your meter box.
T
Tyler ClarkAug 25, 2025
How to fix undesired noise from Anton Oliver Wine Cooler?
- J
  Justin MartinezAug 25, 2025
  Undesired noise from your Anton Oliver Wine Cooler can stem from several sources: * Dust accumulation in the ventilation openings. Try cleaning the unit. * Bottles touching each other. Adjust the bottles to prevent contact. * Fan defect or other mechanical defect. Contact service.

Summary

Important Safeguards

Parts of the Drinks Cooler

Installing the Drinks Cooler

Troubleshooting

Maintenance Guide

Technical Specifications

Anton Oliver BCW-48 Specifications

General

Brand	Anton Oliver
Model	BCW-48
Category	Wine Cooler
Capacity	48 bottles
Temperature Range	5-18°C
Number of Zones	1
Shelves	6 wooden shelves
Weight	35 kg
Noise Level	38 dB
Door	Glass
Temperature Zone	Single Zone