Need help?Do you have a question about the Anton Paar Carbo 510 and is the answer not in the manual?
Explains conventions used for safety messages in the manual.
Details typographical conventions used in the manual for keys and menu paths.
Provides general safety guidelines for operating the instrument.
Explains the meaning of warning signs displayed on the instrument.
Details the physical components of the Carbo 510 Smart Sensor.
Explains the Henry's Law based principle for CO2 content determination.
Describes how the sensor calculates CO2 content based on sample data.
Details the product matrix and available interfaces for connection.
Provides the physical dimensions of the Carbo 510 Smart Sensor.
Lists the requirements for installing the Carbo 510 Smart Sensor.
Provides instructions for mounting the sensor in horizontal or vertical pipes.
Details the correct sequence and position for installing the sensor in a production line.
Describes the optional cut-off valve adapter and its benefits for servicing.
Details the requirements and connection procedure for compressed air supply.
Covers the general electrical wiring and interface overview.
Details how to connect the power supply to the sensor.
Explains how to connect the cable shield for proper electrical installation.
Introduces the CANopen bus system and its application with the sensor.
Explains wiring for connecting the sensor to the mPDS 5 unit.
Details the optional connector set for CAN communication.
Lists and explains error messages and their potential solutions.
Provides instructions for cleaning the Carbo 510 Smart Sensor.
Lists available spare parts with their respective material numbers.
Details the operating conditions for CO2 measurement, temperature, and pressure.
Specifies ambient temperature range, degree of protection, and humidity.
Describes power supply, current consumption, and cable gland details.
Provides detailed diagrams of the sensor's dimensions in millimeters.
Details the 4-pole connector set, including wiring and specifications.
Details the CAN connector set, including wiring and specifications.
General| Measuring range pressure | 0 MPa to 0.6 MPa |
|---|---|
| Temperature Repeatability s.d. | ±0.1°C |
| Pressure Repeatability s.d. | 0.0003 MPa |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Output | 4-20 mA |
To Next Page