Safety Instructions
Always follow the safety instructions during assembly and usage, to
avoid any unnecessary damage to the 3D printer or individual injury
Please contact our customer service first if you have any issue after
receving the products.
Be cautious when using the scraper. Never direct the scraper
towards your hands.
In case of emergency, please immediately cut off the power of
3D printer and contact the technical support.
CUBIC 3Dprinter includes moving parts that can cause injury.
It is recommended to use protection glasses when cleaning/
sanding the printed models to avoid small particles contacting
Keep the CUBIC: 3D printer and its accessories out of the reach
of children.
Vapors or fumes may be irritating at operating temperature.
Always use the 3D printer in an open and well ventilated
ANY
area.
CUBI(.• 3D printer must not be exposed to water or rain.
ANY
CUBIC 3D printer is designed to be used within ambient
temperature ranging 80C-400C, and humidity ranging 20%-50%.
Working outside those limits may result in low quality printing.
Do not disassemble
(:IJBIC 3D printer, please contact technical
ANY
support if you have any question.
To Next Page
Loading...
