Anysecu G6000 - Device Specifications; Network Parameters; UHF Parameters

General Specification
Brand
Anysecu
Model
G6000
Display
33.9x43.8x2.5mm 1.77inch
Working Voltage
3.3V
～
4.25V Standard: 3.8V
Operating temperature
-30℃～+75℃
Standard power
standby battery: 120mA
Maximum current: 800mA
Battery
6000mAh Li-ion
Volume
123*55*37mm
Weight
295g
Network Parameters
System
Linux
Platform
RealPTT (Smart-PTT)
Sim Card Type
1 Standard Sim Size
GPS Frequency
1575.42±1.023MHz
GPS Receive Sensitivity
-152dBm
GPS Receive Cold Start Accuracy
5 meters(50% confidence)
(outdoor)
10 meters(95% confidence)
Integrated full and industrial serial
AT commands, data transmission
UIM deck level
1.8V/2.85V
UHF Parameters
Analog Band
400-470MHz
Storage channels
128
Stepping frequency
100K,50K,25K,12.5K,10K,6.25K,5K
Output power
3W
Receive sensitivity
better than 0.18u
Emission current
≤1.5A
Maximum output power
23dBm
～
30dBm@-104dBm
Receive signal sensitivity
-106dBm
Antenna
50 ohm
*Due to the continuous update of technology, the actual parameters may change without notice.