Specifications
2-5
2.5 Attaching to/detaching from DIN rail
Install this system to the DIN rail and use it.
1. How to attach to the DIN rail
[1] Hang the fixed hook on the upper part of the bottom surface on the DIN rail.
[2] Snap in the machine by pressing it against the DIN rail.
2. How to detach from the DIN rail
[3] Using a screwdriver or similar tool, loosen the DIN hook on the lower part of the bottom
surface by pulling it downward.
[4] Remove the machine from the DIN rail.
Do not install this machine upside-down (with the fixed hook down).
This machine may be detached from the DIN rail due to vibration, etc.
To Next Page
Loading...