AnyWireASLINK
4-4
When a terminal block is used
A cable can be branched as follows using a store-bought terminal block (a terminal block with
which terminals face to face are internally connected).
Branching between cabtyre cables
Conversion to a dedicated flat cable
■ Multi-drop method
The multi-drop method is a way to connect slave units directly to cables.
When applying this method, neither new cables nor non-cable connecting equipment is required.
In the actual wiring, as shown in the image above, the signal lines of transmission cables from one
side and those of transmission cables from the other side are integrated and connected to the
slave unit.
To Next Page
Loading...