AnyWireASLINK
4-5
■ Tree-Branching method
The tree-branching method is a way to re-connect the T-branched stay line using the T-branching
method or multi-drop method.
Actual wiring will be the same as the T-branching method or multi-drop method.
■ Star-Branching method
The star-branching method is a way to connect the master unit
and lay cable radially from a certain branching point to connect
the slave unit.
This method allows for bundling transmission channels easily.
On the other hand, it tends to cause reflection easily.
AnyWireASLINK is not susceptible to reflection by a
transmission method with a low-speed transmission clock,
however, lay cables at the shortest distance with the minimum
number of branches are possible.
To Next Page
Loading...