To Next Page

To Previous Page

Light FX

◼ Light FX

Choose from the Light FX drop-down menu for your favorite light setting. Options are: Static,

Breathing, and Blink.

◼ LED Setting

Choose the Random or Single LED lighting effect option to set continuously changing colors

or a selected RGB color for the device. To restore the default light settings, press the Go

button beside “Reset To Factory Default Settings”.

✓ Random:

Lighting colors cycle between 12 predefined colors.

✓ Single LED:

To set the color, click the color square next to the Side Light/Main

Light option, the Color Control windows will pop up. Point at any

spot on the RGB panel to set your favorite color, or enter RGB

values to define the color. The LED color setting is available for

Static, Breathing, and Blink effect.

◼ Pulsation

Drag the slider bar knob toward left (Slow) or right (Fast) to set up the speed of the lighting

effect, three options are available from Slow to Fast.

◼ Brightness

Drag the slider bar knob toward left or right to set up the brightness of the lighting effect, four

levels of lighting brightness are available from Off to Bright. This setting option is available for

all of the lighting effects.

Questions and Answers:

Need help?

Do you have a question about the AOC AGM700 and is the answer not in the manual?

AOC AGM700 Specifications

General