AOC Agon AG271QG - Advanced Setup Options

26
Extra
1. Press (Menu) to display menu.
2. Press< or >to select (Extra), and press to enter.
3. Press< or >to select submenu, and press to enter.
4. Press< or >to adjust.
5. Press to exit
.
Extra
Reset
Clear each old status of
Auto-configuration and set the color
temperature to Warm
YES
Do not execute reset, return to main
menu.
NO
Over Clock
Over clock Enable
Can choose “On” and “Off” to
decide whether you want to over
clock, default is ”Off”.
Max Refresh rate
V frequency can select:
150Hz/155Hz/Hz/160Hz/165Hz,
the default is 150Hz.
Apply & Reboot
Press the Key “select” to reboot
the PC and make changes in V
Frequency allow monitor over
clocking display.
Deep Sleep
When no signal, monitor will go to
sleep after 15 minutes
ON
When no signal, monitor will not go
to sleep mode
OFF
ULMB
G_sync function disable and timing
V freq>=85HZ & V freq<=120HZ
On
G_sync function enable or display
card do not support G_sync function
Off
Note ：
1） The OSD language is not be reseted.
2） ULMB mode cannot be adjusted when G_sync function enable or display card do not support G_sync function.