25
Audio
Exit Enter Select
50
Volume
Volume 0-100 Adjust volume setting
DTS Sound
Off / Game / Rock
/ Classical / Live /
Theater
Select DTS Sound mode.
Note: It may take up to 2 seconds to switch modes.
TruVolume HD Off / On Disable or Enable TruVolume HD.
Boot Sound On / Off
Boot up / Off sound on and off.
Note: In the standby mode, the monitor will not have the Boot
sound effect when the monitor is turned off.
200Hz 0-100
Low frequency base audio, also the root audio frequency of
the chord in the tone.
500Hz 0-100
Mainly used to express vocals (eg. singing, reading),
Strengthen the thickness and strength of vocals.
2.5KHz 0-100
This frequency has a strong penetrating power and can be
improved to improve the brightness and clarity of the sound.
7KHz 0-100 Enhance the clarity of vocals.
10KHz 0-100
The high-pitched area of music is most sensitive to the high-
frequency performance of the sound.
To Next Page
Loading...
