25
Extra
Exit Enter Select
Extra
Logo Projector
AutoInput Select
Resolution: 3840(H)x2160(V) SDR
H.Frequency: 67 KHz
V.Frequency: 30 Hz
Red 50
Medium
USB Off
USB Selection Auto
Exit Enter Select
Extra
0Green
Resolution: 3840(H)x2160(V) SDR
H.Frequency: 67 KHz
V.Frequency: 30 Hz
G
Off Timer
Image Ratio
0
Wide
Blue 0
Input Select
AUTO/HDMI1/HDMI2/DP/
USB C
Select Input Signal Source
USB Off / 2.0 / 3.2Gen1
For model need to turn on/off USB power during
power saving
.
The default USB setting is Off. If you want to
connect USB-C device, please adjust the USB
setting to 2.0 or 3.2Gen1.
USB Selection Auto / USB C / USB up
Auto : switch with display input source
USB C / USB up : x up stream not change with
input source
Logo Projector Off/Low/Medium/Strong It’s projection logo function.
Red 0 ~ 100 Red gain from Digital-register.
Green 0 ~ 100 Green gain from Digital-register.
Blue 0 ~ 100 Blue gain from Digital-register.
Off timer 0-24hrs Select DC off time
Image Ratio
Wide / 4:3 / 1:1 / 17"(4:3)
/ 19"(4:3) / 19"(5:4) /
19"W(16:10) / 21.5"W(16:9)
/ 22"W(16:10) / 23"W(16:9) /
23.6"W(16:9) / 24"W(16:9) /
27”W(16:9)
Select image ratio for display.
DDC/CI Yes or No Turn On/Off DDC/CI Support
Reset Yes or No Reset the menu to default
To Next Page
Loading...
