6
3. Operation Instructions
3.1 General Instructions
Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor.
By changing these settings, the picture can be adjusted to your personal preferences.
3.2 Control Buttons
Power
Press the Power button continuously to turn off the monitor.
4:3 or wide image ratio hot key
There is no OSD, press + continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input
signal resolution is wide format, the hot key is disabling to adjust.)
Eco Mode / -
Press the Eco key continuously to select the Eco mode of brightness when there is no OSD (Eco mode hot key may
not be available in all models).
Auto / Exit
When the OSD is closed, press the Auto button will be auto configure hot key function.
To Next Page
Loading...
