To protect equipment, always turn off the PC and LCD monitor before connecting.
1 Connect the power cable to the AC port on the back of the monitor.
2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3 (Optional –Requires a video card with DVI port)Connect one end of the DVI cable to the back of the monitor
and connect the other end to the computer’s DVI port.
4 (Optional – Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the
monitor and connect the other end to the computer’s HDMI port.
5 (Optional – Requires a video card with DP port) - Connect one end of the DP cable to the back of the monitor
and connect the other end to the computer’s DP port.
6 (Optional)Connect the audio cable to audio in port on the back of the monitor
7 Turn on your monitor and computer.
8 USB fast charging port (Optional) .
9 Optional–Video content supporting resolution: VGA / DVI-D（Dual Channel）/DVI-D（Single Channel） / HDMI
/ MHL / DP.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
To Next Page
Loading...
