AOC G-TOOLS INSTALLATION
Step 1: Plug the device into a USB port on your computer.
Step 2: The computer operating system will automatically detect the device.
Step 3: For more information on programming the device, go to http://www.aoc.com and follow the
instruction to find the AOC G-Tools.
Step 4: Download AOC G-Tools.
Step 5: Start the installation process by clicking on the file “Setup.exe”.
Step 6: Windows® will prompt you if installation should continue; install the driver despite this.
Note:
When updating to the latest version, the driver will firstly uninstall the last version; it may take a
while for the driver to install before you can start programming the device.
Step 7: When the installation process is completed, please reboot your computer system to assure
the smooth running of the program.
Step 8: The AOC G-Tools icon is displayed in the Windows® taskbar while AOC G-Tools is running, you
can access the device configuration menu by right clicking it.
To Next Page
Loading...
