OSD Setting
Basic and simple instruction on the control keys.
1) Press the MENU button to activate the OSD window.
2) Press - or + to navigate through the functions. Once the desired function is highlighted, press the MENU
button to activate it . press - or + to navigate through the sub-menu functions. Once the desired function is
highlighted, press MENU button to activate it.
3) Press - or + to change the settings of the selected function. Press AUTO to exit. If you want to adjust any
other function, repeat steps 2-3.
4) OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press
button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is
off and then press
button to turn the monitor on.
Notes:
1) If the product has only one signal input, the item of "Input Select" is disable to adjust.
2) If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disable to
adjust.
3) One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are
turned off accordingly.
To Next Page
Loading...
Need help?
General
