To Next Page

To Previous Page

9. White- Balance, Luminance Adjustment

Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.

How to setting MEM channel you can reference to chroma 7120 user guide or simpl use “SC” key and “NEXT” Key

to modify xyY value and use “ID” key to modify the TEXT description Following is the procedure to do white-balance

adjust .

2. Setting the color temp. you want

A. MEM.CHANNEL 3 Warm (6500K):

Warm color temp. parameter is x = 313 ±30, y = 329 ±30

B. MEM.CHANNEL 4 Normal (7300K):

Normal color temp. parameter is x = 301 ±30, y = 317 ±30

C. MEM.CHANNEL 9 Cool (9300K):

Cool color temp. parameter is x = 283 ±30, y = 297 ±30

D. MEM.CHANNEL 10 (sRGB color):

sRGB color temp. parameter is x = 313 ±30, y = 329 ±30

3. Enter into the factory mode

Turn off the power, press two direction keys and turn the power on. Then press the “MENU” button. The factory OSD

will appear.

4. Gain adjustment:

Move cursor to “-F-” and press MENU key

A. Adjust Warm (6500K) color-temperature

1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button)

2. Switch the MEM.channel to Channel 3 (with up or down arrow on chroma 7120)

3. The LCD-indicator on chroma 7120 will show x = 313 ±30, y = 329 ±30

4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100

5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100

6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100

7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2

B. Adjust Normal (7300K) color-temperature

1. Switch the chroma-7120 to RGB-Mode (with press “MODE” button)

2. Switch the MEM.channel to Channel 4 (with up or down arrow on chroma 7120)

3. The LCD-indicator on chroma 7120 will show x = 301 ±30, y = 317 ±30

4. Adjust the RED on factory window until chroma 7120 indicator reached the value R=100

5. Adjust the GREEN on factory window until chroma 7120 indicator reachedthe value G=100

6. Adjust the BLUE on factory window until chroma 7120 indicator reached the value B=100

7. Repeat above procedure (item 4, 5, 6) until chroma 7120 RGB value meet the tolerance =100±2

Other manuals for AOC I2757Fh

Questions and Answers:

Need help?

Do you have a question about the AOC I2757Fh and is the answer not in the manual?

General